4 Easy Plumbing Techniques to Learn

If you’ve read plumbing for dummies, you might have a good idea of how to tackle different plumbing problems, including clogged drains. The techniques covered in this article include using a drain snake and a plunger. You may even want to buy a drain snake and learn how to use it. Once you’ve read the guide, you can practice your new skills as a plumber in Dubai. Fortunately, there is plenty of plumbing for dummies books out there that will teach you how to perform common plumbing tasks.

Fixing clogged drains:

One of the most frustrating problems a homeowner faces is a backed-up drain. Fortunately, many common blockages are easy to solve at home. Several techniques use common household items to remove a clog, including baking soda and vinegar, a wet/dry shop vacuum, and a homemade drain snake. To fix a clogged drain, start by determining the severity of the problem.

Using a plunger:

When you have a clog in the drain, you can use a plunger to help you open the clog. The plunger cup deforms when water pushes through it. Select a plunger with the right action mechanism to prevent injury or clog formation. It would help if you also tried to use a pop-up stopper to clear the clog. This stopper type has a rod that extends through the center of the drain pipe from the rear. A metal coat hanger bent into a hook can be placed underneath the plug to pick up hair from the stopper.

Clearing clogs with a drain snake:

Using a drain snake can clear clogs in your sink, bathtub, and toilet. It can be manually rotated or operated with a motor. It will gradually descend deeper into the drain, picking up debris. Sometimes, the auger will need to reverse direction to reach the clog. When you’re finished, carefully pull the auger back up. If you use a motorized auger, it may splash as you pull the cable back up.

Checking for obstructions with a drain snake:

Before using a drain snake, you should ensure that your pipes are clear and free of debris. You must first thread the drain snake through the drain pipe to do this. It is not advisable to force the auger through the pipe, as it can damage it. When you have threaded the snake, you need to turn the snake handle to the closest entrance of the pipe. If you don’t have a p trap, you may need to run a small stream of cold water through the drain while snake-testing.